How To Connect Canon Camera To Laptop

Solution

This section describes how to connect the camera to a reckoner when importing images to the computer or specifying the camera settings from the computer.

Notation

Use the supplied USB cablevision to connect the camera to the calculator.

Start the computer before making the connection.

We recommend using the Air-conditioning adapter kit ACK-E8(Sold separately) every bit the photographic camera'due south power supply while connecting the camera to the calculator.

1. Ostend that the camera is non continued to the computer, and and then set the photographic camera's power switch to <ON>.

2. Press the <MENU> button to display the menu.

3. Change the camera's Auto power off settings.

3-i. Press the <Cross Keys> to select the [ ] tab, and so select [Auto power off]. Press the <Ready> push.

3-2. Press the <Cantankerous Keys> to select [Off] from the menu that appears, and and then press the <Gear up> button once more.

Please refer to the Education transmission supplied with your camera for more than data about the Auto ability off settings.

four. Press the <MENU> button to turn off the brandish on the LCD monitor, and and then turn the photographic camera'southward power switch to <OFF>.

5. Plug the supplied USB cable into the USB port on your figurer. The port'south location differs between computers. Delight refer to the documentation provided with your computer for more information.

6. Connect the other end of the USB cablevision to the < A/Five OUT / DIGITAL > last on the camera.

7. Set the camera'due south power switch to <ON>.

8. EOS Utility opens and the communications between the camera and the estimator start.

If EOS Utility does non start automatically, click the [Start] button (or button), then select [All Programs], [Canon Utilities], [EOS Utility], so [EOS Utility]. If you employ Mac OS Ten, click the [EOS Utility] icon registered in the Dock.

The message that appears on the screen differs depending on the reckoner's operating system or software installed in the figurer, and also depending on whether the camera is being continued to the estimator for the first fourth dimension or has been connected previously.

If a window to select a program (awarding) appears, select [Canon EOS Utility / Downloads images from EOS camera], and and so click [OK].

For information about operations after connecting the camera to the computer, please refer to the Instruction manual that was supplied with your camera.

This completes the process of connecting the camera to the computer.

Source: https://sg.canon/en/support/8200746300

Posted by: levinejoing1939.blogspot.com