How To Turn Off Laptop Camera

The Laptop Will Not Plough On: How to Troubleshoot It

By Ruri Ranbe

i laptop image past Du...¡an Zidar from Fotolia.com

A laptop may fail to ability on for whatsoever number of reasons. A damaged or defective motherboard or processor, a broken AC adapter or a drained battery pack can all prevent a PC from booting. If your laptop fails to start, before you assume the problem is related to hardware failure, however, y'all should offset confirm that the cause is not related to a faulty connexion.

Pace 1

Remove the AC adapter from the laptop. Close the lid to the laptop and flip the computer over, so that the bottom is facing up. Make sure that the battery pack is installed to the appropriate compartment and is locked or screwed in identify.

Step 2

Turn the laptop over once over again and attach one cease of the Air-conditioning adapter to the ability jack, located on the side of the laptop. Plug the Air-conditioning adapter into the wall.

Pace 3

Confirm that the Air conditioning cord is deeply attached to the power adapter. If your AC adapter is plugged into a surge protector, make sure that the surge protector is plugged into the wall and that the ability switch is in the "on" position.

Step 4

Open the lid, then press the "Ability" push button. If a yellow or red light about the base of the laptop begins to flash but the laptop does non power on, you may need to supercede your AC adapter or the power jack on your computer. If no lights appear, you may need to supercede the battery or the motherboard.

References

Tips

Writer Bio